Adsorption of water molecules in slit pores

We report molecular dynamics (MD) simulations on the adsorption of water in attractive and repulsive slit pores, where the slit and a bulk region are in contact with each other. Water structure, surface force and adsorption behavior are investigated as a function of the overall density in the bulk region. The gas–liquid transition in both types of pores occurs at similar densities of the bulk region.     

二氧化硅胶体晶体组装形貌研究

用原子力显微镜表征了二氧化硅胶体晶体的组装,探讨了二氧化硅微球用自然沉降法、抽滤法、溶剂挥发法组装时的组装行为,同时讨论了不同颗粒表面电位、不同溶剂介质及不同温度对其组装结果的影响。结果表明,颗粒表面电位是影响二氧化硅胶体晶体有序组装的重要因素之一。文中总结了最优的介质组成和温度条件,指出溶剂挥发法是较优的二氧化硅胶体晶体组装方法,其方法操作简单、周期短、得到的胶态晶体质量高,能在较大面积内高度有序。     

Electron density distribution in potassium bis -(carbonato)cuprate(II)

The electron density distribution in potassiumbis-(carbonato)cuprate(II) has been analyzed using x-ray diffraction data from an earlier structure determination. While the copper-ligand geometry is close to square planar the deformation density near the metal is strongly asymmetric. There are local maxima near the copper atom along the line of the Cu-K vectors. These resemble features found in corresponding regions in normal length metal-metal bonds. The observation is consistent with the long range nature of the Coulomb potential associated with the potassium ion.     

Topographical properties of polymer films deposited in capillaries for electrophoretic separations of large organic molecules

Topography and thickness of hydrophilic polymer coatings of fused-silica capillaries for capillary electrophoresis (CE) were investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), and profilometry. Three hydrogels, poly(2-hydroxyethyl methacrylate) [poly(HEMA)], poly(diethylene glycol monomethacrylate) [poly(DEGMA)], and poly(triethylene glycol monomethacrylate) [poly(TEGMA)], were deposited using two procedures, either by simple physical sorption of the polymers, or by derivatization of the capillary wall surface with glycidyl methacrylate (EPMA) followed by polymerization of the appropriate monomers. The performance of the modified capillaries was tested under CE conditions (decrease in the electroosmotic flow, EOF dependence on pH, separation of milk and standard proteins). It has been found that the most important property of the polymer coating is its thickness, whereas its topography and the degree of its hydrophobicity are less significant. Film deposition by physical adsorption is preferable to polymerization on the derivatized surface.     

Parameterization of OPLS-AA force field for the conformational analysis of macrocyclic polyketides

The parameters for the OPLS-AA potential energy function have been extended to include some functional groups that are present in macrocyclic polyketides. Existing OPLS-AA torsional parameters for alkanes, alcohols, ethers, hemiacetals, esters, and ketoamides were improved based on MP2/aug-cc-pVTZ and MP2/aug-cc-pVDZ calculations. Nonbonded parameters for the sp(3) carbon and oxygen atoms were refined using Monte Carlo simulations of bulk liquids. The resulting force field predicts conformer energies and torsional barriers of alkanes, alcohols, ethers, and hemiacetals with an overall RMS deviation of 0.40 kcal/mol as compared to reference data. Densities of 19 bulk liquids are predicted with an average error of 1.1%, and heats of vaporization are reproduced within 2.4% of experimental values. The force field was used to perform conformational analysis of smaller analogs of the macrocyclic polyketide drug FK506. Structures that adopted low-energy conformations similar to that of bound FK506 were identified. The results show that a linker of four ketide units constitutes the shortest effector domain that allows binding of the ketide drugs to FKBP proteins. It is proposed that the exact chemical makeup of the effector domain has little influence on the conformational preference of tetraketides.     

Isometric crystallization of stretched poly(e-caprolactone) sheets for medical applications

Low melting temperature thermoplastic sheets based on poly(e-caprolactone) (PCL) can be formed directly on the patient and are used as immobilization device (mask) in the radiation therapy. The immobilization mask is allowed to harden in isometric conditions on the body at room temperature. A new method for isometric crystallization kinetics of thermoplastic polymer sheets is developed using a tensile-strength instrument. The isometric crystallization method allows investigating the shrinkage force on time of crystallization of stretched samples of thermoplastic polymer sheets or immobilization medical devices. The dependence of the shrinkage force on time is described by Avrami equation and the kinetics parameters of isometric crystallization are calculated. This revised version was published online in July 2006 with corrections to the Cover Date.     

Progress on phthalocyanine-conjugated Ag and Au nanoparticles: Synthesis,characterization, and photo-physicochemical properties

Phthalocyanine (Pc) complexes are an important class of dyes with numerous (e.g., biological, photophysical, and analytical) applications. Among the methods used to improve the properties of these complexes, one should mention the introduction of different substituents, variation of the central metal ion, ligand exchange, and conjugation to nanomaterials (e.g., carbon-based nanomaterials and metal nanoparticles (NPs)). This work briefly reviews Pc complex conjugation to Ag and Au NPs, highlights the different NP shapes, and discusses the diversity of conjugation approaches. Moreover, the use of UV–Vis spectroscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, atomic force microscopy, dynamic light scattering and Fourier transform infrared spectroscopy to characterize Pc-NP hybrids is summarized. The effect of conjugation on Pc photo-physicochemical properties (fluorescence, singlet oxygen generation, triplet state formation, and optical limiting behavior) is discussed, and future perspectives for the synthesis and applications of new hybrids are provided.     

Surface modification of low density polyethylene (LDPE) film by low pressure O2 plasma treatment

In this work, low pressure glow discharge O₂ plasma has been used to increase wettability in a LDPE film in order to improve adhesion properties and make it useful for technical applications. Surface energy values have been estimated using contact angle measurements for different exposure times and different test liquids. In addition, plasma-treated samples have been subjected to an aging process to determine the durability of the plasma treatment. Characterization of the surface changes due to the plasma treatment has been carried out by means of Fourier transformed infrared spectroscopy (FTIR) to determine the presence of polar species such as carbonyl, carboxyl and hydroxyl groups. In addition to this, atomic force microscopy (AFM) analysis has been used to evaluate changes in surface morphology and roughness. Furthermore, and considering the semicrystalline nature of the LDPE film, a calorimetric study using differential scanning calorimetry (DSC) has been carried out to determine changes in crystallinity and degradation temperatures induced by the plasma treatment. The results show that low pressure O₂ plasma improves wettability in LDPE films and no significant changes can be observed at longer exposure times. Nevertheless, we can observe that short exposure times to low pressure O₂ plasma promote the formation of some polar species on the exposed surface and longer exposure times cause slight abrasion on LDPE films as observed by the little increase in surface roughness.     

聚苯胺纳米点阵列的制备和库仑台阶现象

本文制备了PANI纳米点阵列, 利用导电原子力显微镜(C-AFM)表征了其形貌和导电性能, 在室温下观察到PANI纳米点的库仑台阶(Coulomb staircase)现象, 并利用库仑阻塞效应的理论进行了初步的分析.